
Who needs commercial hydro jetting
Jetting earns its cost where lines load up fast or where a backup shuts the business down:
- Restaurant and kitchen lines carrying grease to the trap. See restaurant plumbing.
- Multifamily stacks and building mains, where one blockage backs up into a lower unit.
- Office and retail building drains with heavy restroom use.
- Lines feeding a grease interceptor, often done on the same visit as a pump-out. See grease trap service.
- Lines about to be lined or repaired, which must be clean before the work.
The cheapest jetting is the scheduled kind. A line jetted on a set interval during off hours costs less in lost sales and tenant complaints than the same line cleared at 7 p.m. on a Friday at an emergency rate.
Signs a line needs jetting, not snaking
- Repeat backups on the same line within weeks of the last cleaning.
- Several fixtures draining slowly at once, which points past the fixture to the branch or main.
- Gurgling in floor drains or toilets when other fixtures run.
- Sewer odor near floor drains or cleanouts.
- A camera shows grease, scale or debris coating the pipe wall, not a single object.
What a jetting visit involves
- Camera first. The pro runs a camera through the line to find the blockage, see the pipe material and check for breaks. Jetting a broken pipe can make it worse.
- Access. They open a cleanout or a code-approved opening. Missing or buried cleanouts add time.
- Jetting. A hose with a rear-facing nozzle pulls itself through the line while high-pressure water cuts grease and scale off the wall. The debris flushes downstream.
- Camera after. A second pass shows whether the line is clean or whether a defect, like a sag or root intrusion, needs repair.
- Report and schedule. Ask for the video and a recommended cleaning interval, so the next jetting happens on a calendar instead of during a backup.
Who can do the work matters. In Texas, a registered drain cleaner may clear obstructions in building drains and sewers through existing code-approved openings, under the general supervision of a Responsible Master Plumber. The state's registration rules spell out what each registration allows.
Hydro jetting cost
Angi's 2026 hydro jetting figures are mostly from homeowner jobs. Commercial lines can be longer and dirtier, so treat these as a reference point. The real price comes from an on-site look.
| Service | Reported range | Source |
|---|---|---|
| Hydro jetting a sewer line | $350 to $600 typical | Angi hydro jetting cost guide |
| Complex blockages or heavy scale | Up to $2,000 | Angi hydro jetting cost guide |
| Sewer camera inspection | $275 to $1,800 | Angi hydro jetting cost guide |
| Snaking a sewer main line | $100 to $400 | Angi hydro jetting cost guide |
| Emergency or after-hours work | 1.5 to 3 times the standard rate | Angi plumbing cost guide |
The commercial plumbing cost page shows how these fit with other service pricing.
What to ask the drain cleaning pro
- Will you run a camera before and after, and can I keep the video?
- What is the pipe material and condition? Cracked or corroded pipe needs a different plan.
- Who will run the jetter, and what is their license or registration?
- Where will you access the line? Know your cleanout locations before they arrive.
- Can you work after close so kitchens and restrooms stay open?
- How often should this line be jetted given what you saw?
Keep the video with your maintenance records. When the next backup comes, a side-by-side look at old and new footage shows whether the line is loading up faster than before. That can point to a sag in the pipe, a failing section, or a heavier grease load from upstream that the trap is not catching.
Areas we cover for hydro jetting
Frequently asked
Is hydro jetting safe for old pipes?
Not always. Cracked or badly corroded pipe can be damaged by high pressure. That is why the camera goes in first. If the line is weak, the pro should tell you before jetting it.
Why not just snake the line again?
A cable opens a path through the clog but leaves grease and scale on the wall, so the line loads up again. Jetting cleans the wall. Angi lists snaking a main at $100 to $400, cheaper per visit but often more visits.
Does jetting the kitchen line replace a grease trap pump-out?
No. Jetting cleans the pipes. In Dallas the trap itself still needs a full pump-out by a city-permitted liquid waste transporter, at least every 90 days or sooner at 25% full, with a signed manifest.
Can jetting be done overnight?
Many commercial lines are jetted after close so the business stays open. Ask for it in the form. After-hours work usually costs more.