Who needs a backflow test in Dallas
A backflow assembly keeps water from your building from flowing back into the public supply. Dallas Water Utilities runs a cross-connection control and backflow prevention program under Dallas City Code Chapter 49, Section 49-29, and Texas Administrative Code 290.44.
- High-hazard assemblies need a test every year. The hazard rating of the connection decides it, not the name on the lease. If you are not sure how your device is rated, the tester can tell you from the assembly and your past reports.
- New, repaired or replaced assemblies get tested at installation. TCEQ guidance notes a new assembly can fail right out of the box.
- Lawn irrigation devices do not need an annual test in Dallas. They only need testing when newly installed, repaired or replaced.
DWU inspectors also do periodic customer-service walk-throughs of facilities to confirm backflow protection is still in place and to look for new cross connections.
Signs your assembly needs attention
- You got a notification letter. DWU is mailing letters to locations on record with high-hazard devices. A letter means you need a registered tester.
- Your last test is close to a year old. Put the date on the maintenance calendar, not in someone's inbox.
- An RPZ is dumping water from its relief port. Something inside needs service. Get it looked at before the next test, not at it.
- You changed the building. New equipment, a new kitchen or new piping can create a new cross connection.
- A device failed. The 30-day window to repair and retest started with the failed result.
What a backflow test involves
- Inventory. The tester finds each assembly, records its type, size and serial number, and checks access. Devices in vaults or behind locked fences take longer.
- Short shutdown. Testing usually needs a brief water shutoff on that line, and the gauge work takes about 15 to 30 minutes per device. Restaurants, clinics and multifamily buildings should plan it around service hours and tenants.
- Gauge test. The tester connects a differential pressure gauge to the test cocks and checks each check valve and, on an RPZ, the relief valve.
- Filing. Dallas testers submit results through the SwiftComply portal. DWU charges a $15 fee for each passed test submitted there. Failed tests are exempt.
- Repair and retest if needed. A failed device gets 30 days. The tester may rebuild it on the spot or quote the repair.
Fire line assemblies are a special case. TCEQ allows a tester to work on fire lines only when permanently employed by an Approved Fireline Contractor.
Backflow testing cost
These are national ranges from the FindBackflowTesters 2026 cost guide, per device, for one visit. The real price comes from an on-site look.
| Commercial assembly or charge | Reported range |
|---|---|
| Reduced pressure zone (RPZ) test | $95 to $300 |
| Double check valve assembly test | $68 to $216 |
| Pressure vacuum breaker test | $57 to $180 |
| Fire line assembly test | $133 to $420 |
| RPZ repair after a failed test | $250 to $1,000 |
| RPZ retest after repair | $60 to $200 |
The same guide says each extra device tested on the same visit usually costs about 70% of the first. Add the $15 Dallas filing fee for each passed test. More detail is on the commercial plumbing cost page.
What to ask the backflow tester
- TCEQ license number? Anyone who tests or repairs a backflow assembly in Texas must hold a TCEQ backflow prevention assembly tester license.
- Registered with Dallas? Testers must be registered with the City of Dallas and enrolled with SwiftComply. The city publishes a list of registered backflow testers.
- Is filing included? Ask whether the $15 fee is in the price or added.
- What if it fails? Get repair pricing and retest pricing before the test, not after.
- Can you do fire lines? Only if the tester's employer is an Approved Fireline Contractor.
- Is your gauge calibrated? Ask for the current calibration record.
Building out a new space with a new assembly? See commercial plumbing contractors. Running a kitchen? Grease trap service is your other recurring compliance item.
Areas we cover for backflow testing
Frequently asked
Does my sprinkler system backflow device need a test every year in Dallas?
Not for a lawn irrigation device. Dallas only requires a test when an irrigation backflow device is newly installed, repaired or replaced. High-hazard assemblies are the ones on an annual cycle.
What happens after my device fails a backflow test?
You have 30 days to have it repaired and retested. Failed results are not charged the $15 SwiftComply filing fee, but the passing retest is.
Can the plumber who fixes my sink also test my backflow device?
Only if that person also holds a TCEQ backflow prevention assembly tester license and is registered with the City of Dallas. Ask for both.
My backflow device is tied to a building permit. Where does the report go?
Since September 25, 2026, the tester submits it through SwiftComply, and Dallas Water Utilities forwards approved reports to the Planning and Development Department under the permit number. The report should not go straight to the plumbing inspector.